Comments on: 101hero: Assembling the printer https://gabor.heja.hu/blog/2017/03/16/101hero-assembling-the-printer/ Tue, 10 Mar 2026 19:17:51 +0000 hourly 1 https://wordpress.org/?v=5.3.2 By: Gabor Heja https://gabor.heja.hu/blog/2017/03/16/101hero-assembling-the-printer/#comment-932 Fri, 07 Apr 2017 06:36:11 +0000 http://gabor.heja.hu/blog/?p=235#comment-932 Hey Robert!

Thanks for the comment. Though I have one suggestion, if you place the pylons in these positions then you will have mirrored prints (so from above the letter “Z” will be “S”), to prevent this you would need to swap the pylon A and B (or their connectors and end-stops on the controller board), so pylon A should be at 8 o’clock and pylon B at 4 o’clock.

Have a nice day,
Gabor

]]> By: Robert Colbert https://gabor.heja.hu/blog/2017/03/16/101hero-assembling-the-printer/#comment-931 Fri, 07 Apr 2017 03:35:55 +0000 http://gabor.heja.hu/blog/?p=235#comment-931 For those that like things to line up nicely, Pylon C is at the top of the Y axis so if you assemble the printer with the extruder door facing away from pylon c, having the extruder open towards you will provide a top down X/Y layout of the print surface.

Pylon orientation would be C @ 12 o’clock, A @ 4 o’clock, B @ 8 o’clock.

]]>